The WS340XR Package is what WSRD would call, "max effort". The only requirement for the engine is the addition of the WSRD Head Stud Upgrade. Boost is increased to 35-36 PSI. This increase in boost resulted in 334 horsepower at the hubs. As this is refered to max effort style package; please keep in mind that it is recommended to upgrade to our V2 Sleeved Engine Package to ensure cylinder integrity. Stock camshafts allow for clean idle and that low end grunt that is needed to run trail/dune friendly clutching.
No corners are cut in performance nor product selection used to achieve these power levels. WSRD runs the industry standard for high performance fuel injectors, the newest technology in turbochargers, the best performing intercoolers, and the best clutch options for oem style clutching, KWI Clutching. These packages have also been paired with aftermarket clutch offerings from STM Powersports.
- Stock ECU; 334 Wheel Horsepower (380 Crank Horsepower)
- Boost: 35-36 PSI
- These results are on E85 fuels only (please consult with WSRD about your fuel of choice before purchase - example: Ignite Racing Fuels, VP, ect.)
- These results are on WSRD's MainLine Hub Dyno
What's Included? (Package Essentials)
- Forced Performance XR42 Turbocharger
- Added Turbocharger Options:
- Includes TiAL Wastegate
- Includes WSRD Install Kit - Oil Feed Line & Crush Washers, Oil Drain Gasket, OEM Coolant Line (WSRD Modified) + O-Rings
- Includes OEM Exhaust Manifold Gasket
- WSRD Upper Intercooler Pipe + Clamp Kit (Turbocharger to Intercooler)
- WSRD Exhaust Manifold Stud & Nut Kit + Install Tool (Can reuse OEM nord lock washers from OEM bolts)
- WSRD 4 Bar MAP Sensor Kit
- 100% plug and play with the factory harness
- WSRD Custom WS340XR E85 Tune - via the DynoJet Power Vision PV3
- DynoJet Power Vision is included
- Alternate Fuel MAPs will be available soon
- DynoJet Can-Am PV3 Wideband Kit (Logging Capability)
- ID 1300X Injector Set + PNP Adapters
- WSRD E85 Fuel Pump and Rewire Kit
- WSRD Ethanol Tester
- WSRD Head Stud Upgrade
- DezertFreak Mounting Arm
Your machine must have a 2018+ Turbo R Fuel Pump or 2020 Turbo RR Fuel Pump to properly adjust fuel pressure and setup this system! For 2017 Models or 120HP Models please select the available option for the 2018+ Turbo R Fuel Pump.
A BOV IS REQUIRED WITH PACKAGE! Several options are available and many clients have previously installed this option, but many vendors use an upper intercooler pipe option that is replaced with our charge tube kit when using the XR42 Turbocharger. The BOV is required to be install in the "lower" longer charge tube.
BOV Options: (Required)
Package Upgrades: (Optional)
- WSRD Catch Can Kit w/ Black Outerwear Filter Cover
- C&R Racing Intercooler
- WSRD 10" Fan & Shroud Assembly
Clutching Options: (To add the correct clutch to your performance package add the option above. Or, click the link below for more detail.)
- KWI Complete AO Clutch Kit
- Clutching available for sea level and high altitude duning, along with track and trail riding
Instructions for modifying fuel pressure shown below:
If you would like to add the Emtron, Syvecs or Motec Engine Management System, please consult with the WSRD Sales Department. For those clients looking to upgrade from another WSRD Performance Package, please reach out directly to WSRD for custom quotes on our WS340XR Package!